Roav SmartCharge F3 Manual

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for the car charger of Roav SmartCharge F3 (R5132).

Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply.

Read all instructions and cautionary markings before using this product.
Do not expose to rain, moisture, or snow.
Use of an attachment is not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.
Do not operate this car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
Do not disassemble this car charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
To reduce risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
To reduce risk of fire or electric shock, do not interconnect output terminations.
To reduce risk of fire or electric shock, do not interconnect output terminations.
Avoid long exposure to direct sunlight, which may cause damage to the device.
Exposing this product to open flames may cause it to explode.
Do not use this product in strong magnetic fields.
Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
For continued protection against risk of fire, replace only with the same type and ratings of fuse, fuse rating is 63V DC / 7A.
Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving, as some features are limited while the vehicle is in motion. Failure to pay full attention to the operation of your vehicle could result in death, serious injury or property damage. You assume total responsibility and risk for using this device.

What's Included

Roav SmartCharge F3

Manual

At a Glance

Overview

Quick Charge 3.0 USB port
AUX socket
Microphone
USB port
LED display
M/Mode button
/Multi-function button
CH
- Press to display the FM frequency.
MicroSD card slot
Car Charger

Press and hold for 5 seconds to power on/off.

LED Display Guide

LED Display	Status
NOTCONNECTED flashes	Bluetooth not connected
90.0 *The FM frequency may vary depending on the default setting.	Bluetooth connected
NO CARD	No microSD card detected
WAITING.	Reading a microSD card
CARD ERROR	A card error has occurred and the card cannot be read.
NO USB DISK	No USB drive detected
WAITING.	Reading a USB drive
USB ERROR	A USB error has occurred and the USB drive cannot be read.
	Press and hold M. When the USB drive or microSD card is read, music mode shows from left to right: Shuffle, Repeat All, Repeat One

The UI is subject to change without notice.

Getting Started

Plug Roav SmartCharge F3 into your vehicle's cigarette lighter socket.
Start your vehicle's engine.
The LED display will light up, and show the Roav logo and current voltage of the car battery.
Download the Roav Charger app from the App Store (smartphones running iOS 10.2 or higher) or Google Play (smartphones running Android 5.0 or higher).

Enable Bluetooth on your smartphone and search for available Bluetooth devices.

Select "Roav F3_XXXX"and connect.

Once successfully connected,

will stop flashing.
Getting Started - Successful Bluetooth Connection

FM Transmitter

The Roav SmartCharge F3 allows you to connect your phone to your car's stereo via FM signal. There are two ways to set up:

Use the F3

Press and hold CH for one second when using the F3 for the first time.
F3 begins to search an unoccupied FM frequency.
Turn on the FM radio in your car and tune it to the FM frequency set on the F3.
To customize your FM frequency:
1. Press CH on F3.
  FM frequency displays on the LED screen.
2. Press to select a FM frequency. Make sure the transmitting frequency matches the frequency your radio is tuned to.

Use the Roav Charger App

Follow the on-screen instructions in the Roav Charger app to complete connection via FM Radio.

Tap the "FM radio".
Tap "SmartScan" (Figure a).
The Roav Charger App begins to search an unoccupied frequency.
Press and hold one preset station to customize stations.
Adjust the slider or tap to choose a radio frequency (Figure b).
Tap "Set". Once chosen, the previous presets are replaced by the new ones.
Turn on the FM radio in your car and tune to a frequency that matches the frequency set on the Roav Charger App.
Play audio from your phone.
You will hear the audio from the car stereo.

You can also connect the car charger to your car's stereo by using a 3.5mm AUX cable.

Playing Music

When the car charger F3 is successfully connected to your smartphone, you can press the multi-functional button to play music from your phone. Music can then be streamed to your car's sound system via FM transmitter or the AUX socket. You can also insert a USB flash drive or a microSD card to enjoy music that is stored on these devices.
Playing Music - Step 1

Play / Pause	Press
Previous / Next track	Press
Select a music mode	Press and hold M. Press

Playing Music - Step 2

To further reduce echo and background noise on your calls and music, you can connect a 3.5 mm AUX cable (not provided) to the AUX socket of the car charger and the AUX-In socket of your car's audio system.

Hands-Free Calling

When the car charger is successfully connected to your smartphone, you can enjoy convenient hands-free calling.

Answer / End a call	Press
Reject a call	Press and hold for 2 seconds

Charging Your Devices

Roav SmartCharge F3 has two USB charging ports (one 5V/1A output port and one Quick Charge 3.0 port). You can charge two devices at the same time with a maximum output of 22W.

Specifications

Specifications are subject to change without notice.

DC input: 12V - 24V
Quick Charge 3.0 output: 3.6V-6.5V 3A, 6.5V-9V 2A, 9V-12V 1.5A
Bluetooth: V4.2
Bluetooth transmission distance: 10 m / 32.8 ft
USB audio format: .mp3.wma.flac.wav
FM frequency range: 78-90 MHz
FM transmission range: 2 m / 78.7 in
USB file system: FAT, FAT32, exFAT
Operating temperature range: -20°C to 40°C/ -4°F to 104°F
Storage temperature range: -40°C to 85°C/ -40°F to 185°F

Notice

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site www.goroav.com.

This product can be used across EU member states.
The product shall only be connected to a USB Interface of version 2.0 or higher.
The device complies with RF specifications when the device used at 20mm from your body.
BT Operating Frequency Range: 2402-2480 MHz; BT Max Output Power: 8dBm

The following importer is the responsible party (contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

This product is designed and manufactured with high quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.

The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA 91730, USA
Telephone: 1-909-484-1530

Trademark
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Google Play and the Google Play logo are trademarks of Google LLC.

Customer Service

18-month limited warranty
Lifetime technical support
support@anker.com
03-4455-7823